Bernie's Rock & Garden

Cell-Tek

LOAD SUPPORT:

Geocellular Confinement takes infill materials and produces a stiff base by creating a semi-rigid slab. The system prevents the lateral displacement of infill materials which eliminates rutting and washboarding usually associated with gravel pavements. The system allows for a reduction in overall base thickness, as well as enabling subgrade materials to withstand more than 10 times the number of cyclic load applications, without the appearance of deflection when compared to unconfined aggregates. GCS allows for the use of lower quality infill materials in situations where quality aggregates are not readily available and helps to create pavements on soft soil subgrades. When it comes to load support in porous paving applications, Cell-Tek's Gravel-Tek System delivers the competitive advantage.

LOAD SUPPORT GUIDELINES:

PRODUCT	SG200	SG300	SG400	SG600
TYPE OF TRAFFIC	Pedestrian & Small Cars	Cars & Pickup Trucks	Mainetance Trucks	Heavy Trucks & Fire Access
LOAD DETAILS	5000 lb. (2.5 tonne)	8000 lb. Axle Loads: 18kN	H10 Loading 40,000 lb. Axle Loads: 75kN	H20 Loading 80,000 lb. Axle Loads: 1455kN
SUBGRADE CBR	>3%	>3%	>3%	>3%
SURFACE WEAR LAYER (overfill)	2"	2"	2"	2"
TOTAL SYSTEM THICKNESS	4"	5"	6"	8"
GEOTEXTILE (filtration & separation)	YES Nonwoven	YES Nonwoven	YES Nonwoven	YES Nonwoven
EQUIVALENCY TO UNCONFINED GRAVEL	8" - 10"	12" - 14"	16" - 20"	24" - 30"
WATER STORAGE	1.6"	2"	2.4"	3.2"
For CBR <3% additional base support may be required or increase to next cell depth.

AVAILABLE SYSTEMS:

FOR MORE DETAILS: CLICK HERE

FOR MORE INFORMATION, CONTACT US AT 786-242-4443. SAMPLES AND PRODUCT DEMONSTRATIONS AVAILABLE UPON REQUEST.

GENERAL QUESTIONS

• Is it expensive?
When using Cell-Tek you will experience a cost savings in time, materials, and labor.

• How much will I save by using Cell-Tek products?
For 200SG and 300SG please click here to use our Celltekulator! Simply enter the square footage of your job and it will show you the savings by using Cell-Tek vs. a traditional installation.

• Can I get a price list?
Call Bernie's Rock & Garden at 786-242-4443 for pricing information.

• How long does it take to get the product?
Most products are in stock and can be shipped out the same day or the very next day.

• Do you offer a warranty?
Cell-Tek LLC provides a full warranty for manufacturing defects. We are limited to furnishing the product only and will replace without charge any product proven defective under normal use without charge. Cell-Tek LLC makes no warranties or representations regarding the suitability of its products for specific uses and applications.

• Who has used this product?
Homeowners, contractors (residential and commercial), U.S. government, U.S. military, Army of Corps of Engineers.

• Is Cell-Tek recognized by any leading industry organizations?
All leading industry organizations, including the Interlocking Concrete Pavement Institute, recognize the benefits of using a cellular confinement system, such as Cell-Tek, for a wide variety of applications.

• Can I get LEED credits for using recycled Cell-Tek products?
Yes! Consult your project engineer for more details on how you can earn LEED credits by using Cell-Tek.

PRODUCT QUESTIONS

• What are the products made of?
We proudly use 100% Recycled HDPE (High Density Polyethylene).

• Why does the product have texture?
The texture provides additional reinforcement to the structure of the grid and maximizes frictional resistance.

• Why does the product have holes in it?
The holes or perforations have two purposes. They are designed for lateral drainage to reduce hydrostatic pressure in various applications. In addition, they allow for vertical aggregate lock.

• How is it packaged?
Cell-Tek products are collapsed, folded, banded and individually shrink wrapped for convenient shipping and handling.

• Will exposure to sunlight affect it?
Our Verti-Cell Botanical Retaining Wall has a UV proctective ingredient in the exposed front face.

• How does it work?
Cell-Tek confines material and prevents lateral movement away from the applied load. The connected and filled cells create a geocell panel that acts as a large mat by spreading the load over an extended area.
This translates to a 40% - 60% reduction of the sub base saving both time and material cost.

• What are the various applications?
Driveways, patios, walkways, boat ramps, shed pads, rooftop paving, beach access, loading docks, nature trails, wetland crossings, service roads, shoreline protection, emergency access, golf courses, waterfronts, cart paths, pavers, asphalt, concrete, temporary roads, drainwage swales, etc. There are endless possibilities.

• Can I use it to create a green roof?
The SG200 and SG300 are ideal for stabilizing the planter layer of any green roof. The grid installed with tendons will prevent vertical uplift on any roof, sloped or flat. Additionally, perforations in the cell walls allow for lateral drainage. Grids work with all sub drainage systems and can virtually be incorporated into any green roof design.

INSTALLATION QUESTIONS

• Is it easy to install?
Yes! Click here for our Installation Guide which includes simple step-by-step instructions.

• Is on-site installation training available?
Yes. Depending on the location of the job we often send out technicians to assist with an initial installation. Call us at 1-888-851-0051 to inquire about this service.

• How much Stabilizer Grid do I need for my job?
Each Stabilizer Grid covers an area of 170 square feet. Calculate the square footage of your job and divide by 170 to determine the number of grids needed. Round up to cover wastage. If you are using 200SG or 300SG please click here to use our new Celltekulator – it will instantly calculate the materials needed and savings!

• Can you provide grids with custom specifications?
Yes. As the manufacturer we have the ability to customize the size, cell depth, seam interval, etc. If you have a specific project that requires a custom size cell or grid please contact us.

• Can I cut this product easily?
It can be cut easily with a razor knife, utility scissors, etc.

• What types of infill materials can I use?
There are many options depending on the application. Sand, gravel, soil, a mixture of infill materials; are all possibilities.

• How do you connect the product?
Quick Clips are available to easily connect the grids together. Click here to learn more about Quick Clips.

• Do you really have to connect the products?
Yes. The object is to create a single geocell mat of any size and/or shape for maximum strength.

• Can you use this on a slope?
Yes. Some slopes may require engineering. Please call us to discuss your needs with our engineering staff.

• Can I install it on a shoreline so it partially submerged in the water?
Yes. The product is completely waterproof and it can be used for this application.

• After the Stabilizer Grid is expanded, can I drive on it?
Once cells are completely filled loads can be applied.

• What can I plant in the exposed cells of the Verti-Cell wall?
A wide variety of indigenous plants can be planted in the exposed cells. Contact your local garden center or a landscaper for advice on which plants would work best for your climate, etc.